Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

Decorated can bodies moving along the conveyor after printing

Applications · Hair care

Hair care is four chemistries on one filling line, not one product.

Hairspray, mousse, dry shampoo, colour. A brand sells them as one range and fills them on one line, but the can meets four different sets of chemistry, and two of the four ask questions the other sectors never ask. This page is about which can each of them needs — including the case where aluminium is not the answer.

De 35–55 mm · 8 colours · 20 mm or 1″ valve

What separates a cosmetic can from an industrial one?

Two things, and neither of them is the metal. The first is the coating: a cosmetic fill is expected to sit against the lining for two or three years without the product changing colour or smell, which rules out grades that would be perfectly adequate for a technical spray. The second is that the can is read. An industrial aerosol is bought by someone who reads the label once and then cares about the nozzle; a hair care can is read at arm's length on a shelf, next to eleven competitors, by someone deciding whether the brand looks expensive. Both jobs sit on the same object, and neither of them survives being treated as decoration.

Which carrier is in the can?

Four carriers, four different loads on the lining. Getting this wrong is the failure that appears eight months into shelf life rather than on the filling line, which is why it is settled on paper before a cylinder is cut.

The four hair care families, and what each one demands of the can
Family Carrier usually seen What it drives on the can
Styling — hairspray, spritz Ethanol with a hydrocarbon or DME propellant Lining against the solvent; internal pressure; a body narrow enough to hold
Mousse and styling foam Water-based emulsion with a hydrocarbon propellant Emulsion stability — the can must not release metal ions into the fill; a foam valve, not a spray valve
Wash-off — dry shampoo, shampoo foam Starch in solvent, or surfactant in water Lining against whichever carrier; the valve and actuator do most of the visible work
Colour Alkaline aqueous, ammonia or MEA The one family where aluminium itself is in question — see below

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

Where is aluminium the wrong substrate?

Permanent and demi-permanent colour, and anything else that runs alkaline. The oxide layer that makes aluminium inert is stable across roughly pH 4 to 9; above that it dissolves, and an alkaline fill will find the base, the shoulder and any discontinuity in the lining. An internal coating buys time, and on a mildly alkaline formula it may buy all the time the product needs. On a strongly alkaline one it buys a warranty claim instead.

So the honest answer here is a test, not a recommendation. We ask for the actual formula rather than the category, and if the pH and the alkalinity reserve put the fill outside what a coated aluminium body handles with margin, we say so and the project goes to a different substrate. A can maker who promises any formula in aluminium has either not tested it or is not planning to be there when it fails.

What does the propellant do to the lining?

More than most brands expect. Dimethyl ether is a solvent as well as a propellant: it partitions into the concentrate and changes what the lining is actually in contact with, so two hairsprays built on the same concentrate with different propellants are two different lining questions. A hydrocarbon blend stays largely in the headspace and leaves the fill closer to what the formulator wrote down. This is the most useful single thing to know when a formula that passed in one market is moved onto a filling line in another.

Which diameters and heights does this sector use?

The same range as every other sector — De 35–66 mm and H3 88–240 mm — with most of the volume in the two narrow bands, because a styling product is operated one-handed:

  • De 35–45 mm — styling sprays, where the body has to sit in one hand
  • De 46–55 mm — mousse and family-size hairspray
  • De 56–66 mm — rare here; at that width the can stops being held and starts being stood

Height sets the fill volume. The valve cup is 1″ (25.4 mm) or 20 mm and is crimped to your drawing; whether the valve is a spray, a foam or a vapor-tap type is your component supplier's decision, not ours.

What does the print have to do here?

The same standard as personal care, and for the same reason: the can is read at 30 cm. Not a higher standard — the two sectors are bought the same way, by the same person, from the same shelf. Up to eight colours applied to the formed body, with the artwork checked against the process before a cylinder is cut: minimum line weight, trapping between adjacent colours, and whether a fine reverse will fill in on a curved aluminium surface. Metallic finishes and matte or gloss varnishes are quoted per project.

Send the formulation with its pH, or at least its carrier. On this sector more than any other, a lining recommendation without the formula is a guess, and the colour family is where a guess gets expensive. Lining grades and the working pressure are marked as pending on the specification sheet until the factory confirms them in writing TBC

EA Packaging makes the container only: we do not fill cans, do not formulate product, and do not issue EAC, ANVISA or ANMAT registrations. What you get is a monobloc aluminium can, De 35–66 mm and H3 88–240 mm, printed in up to 8 colours, with the internal coating matched to the formula you describe and the valve cup at 1″ (25.4 mm) or 20 mm. Both are confirmed in writing before we quote, and we supply the test reports and material declarations your importer files under its own name.

Questions

Questions about hair care

Can the same can run hairspray and mousse?

No, and the reason is the lining rather than the size. A hairspray is a solvent system under its own pressure; a mousse is an emulsion that has to stay an emulsion for two years without the metal contributing to the break. They also want different valves. If both resolve to the same De × H3 the body may be physically identical — the specification is still not the same.

Do you supply the valve, the foam spout or the cap?

No. The can and the crimped valve cup are ours; the valve, the actuator, the foam spout and the cap are yours or your component supplier's. We crimp to your drawing so nothing on the filling line changes, and responsibility for a leaking valve stays with whoever made the valve.

Is aluminium suitable for permanent hair colour?

Sometimes, and the answer is a test rather than a yes. Alkaline fills attack aluminium above roughly pH 9, and how fast depends on the formula and not on the sector. Send the formula and we will say whether a coated aluminium body has margin; if it does not, the honest recommendation is a different substrate. What we will not do is quote it first and discover it at the corrosion test.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8