Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

A printing unit on the decorating line, with can bodies at the mandrels

Applications · Industrial

Industrial aerosols are bought by a plant, not by a person.

Mould release, anti-spatter, contact cleaner, marking spray, adhesive spray, penetrating oil in bulk. The buyer is a maintenance engineer or a purchasing department, the decision runs on specifications and approved-vendor lists, and the can has to survive a documents check before anyone looks at the print. That changes what this page has to answer.

De 56–66 mm · solvent carriers · batch traceability

What does an industrial buyer ask that a consumer buyer does not?

Four things, usually in writing: what the can is made of, what the internal lining is, whether the batch can be traced, and whether the supplier holds a quality management certificate. A consumer asks what it smells like. The industrial questionnaire is longer and it arrives before the first sample, which is why the specification sheet for this sector has to be complete rather than persuasive.

That is also why the values the factory has not confirmed are marked TBC on this site rather than filled with a plausible number. A purchasing department that finds a discrepancy between the website and the certificate stops the process.

Which industrial products land on aluminium?

Solvent-carried technical aerosols mostly: mould release agents for plastics and die casting, anti-spatter for welding, electrical contact cleaner, marking and layout sprays, spray adhesives, and open-gear or chain lubricants. Water-based industrial products exist — some release agents and some cleaners — but the sector is dominated by solvents, which puts the specification back on the lining and the base.

  • Mould release agent — silicone or non-silicone, solvent-carried, often a large fill
  • Anti-spatter and welding aids — a thin film product, usually a mid-size fill
  • Contact cleaner — aggressive solvent, small fill, high value
  • Marking, layout and adhesive sprays — pigment or resin in solvent

Why is the large format standard here?

Because the unit of work is a shift, not a repair. A mould release agent is applied every cycle, hundreds of times a day; an anti-spatter is sprayed across a bench repeatedly. That moves the format to De 56–66 mm at the tall end of the 88–240 mm height range, where a single can lasts a shift and the operator is not changing cans instead of working.

The trade-off is weight and pressure. A large body at a high fill carries more energy, so the base geometry and the burst margin matter more than on a 300 ml personal care can — and that is exactly the data a technical buyer will ask for.

What is not negotiable in this sector?

Traceability. A plant that has an incident needs to know which batch of cans went into which production run, and it will ask for lot marking on the can or the carton rather than accept a date range on an invoice. Marking position and method therefore belong in the specification, agreed with the filling line, and they are the item most often left out when a first order is prepared in a hurry.

Marking method, position and character set are confirmed per project TBC. A plant that requires a specific format will reject a can that carries the right information in the wrong place.

What about documentation for the approved-vendor list?

The certificate, the specification sheet and the sample are the three documents an approved-vendor process consumes, and each one has to agree with the others. Where a value is still open it is better to submit it as open and close it in writing than to submit an estimate: an estimate that reaches a vendor file becomes a contractual number.

What this sector asks of the can
Requirement Why it matters What we do
Complete written specification It enters an approved-vendor file Published as confirmed-or-TBC; no estimated values
Solvent carrier compatibility Technical aerosols are mostly solvent-carried Lining shortlisted per carrier; grades on the specification sheet TBC
Batch traceability A plant needs to trace an incident to a run Marking method and position agreed per project TBC
Large format The unit of work is a shift De 56–66 mm at the tall end of H3 88–240 mm
Burst and deformation data A technical buyer asks for the number Test report requested from the plant TBC
Quality management Vendor lists gate on a certificate ISO 9001, held since 2017; copy supplied with the quotation

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

Where we are not the right supplier

Where the product needs a pressure vessel rather than an aerosol can, where the fill demands a lined steel container, or where the annual volume belongs on a three-piece tinplate line. Saying so early is cheaper for both sides than discovering it at the sample stage.

EA Packaging makes the container only: we do not fill cans, do not formulate product, and do not issue EAC, ANVISA or ANMAT registrations. What you get is a monobloc aluminium can, De 35–66 mm and H3 88–240 mm, printed in up to 8 colours, with the internal coating matched to the formula you describe and the valve cup at 1″ (25.4 mm) or 20 mm. Both are confirmed in writing before we quote, and we supply the test reports and material declarations your importer files under its own name.

Questions

Questions about industrial aerosols

Can you supply the burst and deformation pressure figures?

The figures are being requested from the plant as a test report and are marked TBC on this site until they arrive. We will not publish an estimate: on an industrial project that number goes into a vendor file and becomes contractual, and an approximate figure that is later corrected is worse than an open field that is closed in writing.

Do you mark batches on the can?

Batch or lot marking is specified per project — method, position and character set agreed with your filling line — and it is marked TBC until confirmed. It is the detail most often omitted when a first industrial order is prepared quickly, and the one a plant will reject a delivery over.

Is ISO 9001 enough for an approved-vendor process?

It is the certificate we hold, in force since 2017, and a copy is supplied with the quotation. Whether it is sufficient depends on the customer's own vendor criteria; some processes also ask for a plant audit, a sample retention policy or specific test reports, and those are answered per enquiry rather than claimed on a web page.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8