Certifications
One certificate in force. The rest of this page is what we do not claim.
A certifications page is normally a wall of logos. This one is a table with three honest statuses: in force, not claimed, and open. Nothing appears as held unless a copy of the certificate is in hand, because a buyer who checks a claim and finds nothing behind it stops trusting every other number on the site.
What is actually held?
ISO 9001, in force since 2017. That is the certificate this factory holds, and it covers quality management of the manufacturing operation rather than the performance of any individual can. A copy is supplied as a PDF with the quotation, and the certificate number and validity dates are on that copy rather than reproduced here — a number transcribed onto a web page and never updated is worse than no number at all.
What ISO 9001 does and does not tell you is worth stating. It says the plant runs a documented quality system with defined processes, records and corrective action. It does not say the cans meet a particular pressure rating, that a lining is approved for a particular formulation, or that a batch will behave the same as the sample. Those are answered by a specification, a test report and a sample respectively.
The full list, with status
| Item | What it would cover | Status |
|---|---|---|
| ISO 9001 | Quality management of the manufacturing operation | In force since 2017 — copy supplied with the quotation |
| ISO 14001 | Environmental management | Not claimed — no certificate to show |
| ISO 45001 | Occupational health and safety | Not claimed — no certificate to show |
| FSSC 22000 / BRCGS | Food-safety management systems | Not claimed — the factory makes aerosol cans, not food-contact packaging |
| GMP / pharmaceutical grade | Medicinal product manufacturing | Not claimed, and out of scope — no pharmaceutical aerosols are made |
| Halal / Kosher | Religious conformity of materials and process | Not claimed — ask if your market requires it |
| Food-contact declaration (EU 1935/2004, FDA) | Suitability for direct food contact | Open — asked of the factory TBC |
| REACH SVHC / RoHS statement | Substance restrictions in the finished article | Open — asked of the factory TBC |
| Third-party social audit (SMETA, SEDEX) | Labour and ethics audit of the site | Not claimed — ask if your vendor process requires it |
| Customer-specific audit | Audit against your own criteria | Arranged per enquiry |
| Batch inspection record | Inspection record for the consignment | Issued per shipment |
| Certificate of Analysis (CoA) | Batch composition and the values measured on it | Issued per batch |
| Coating weight and print records | Lining weight and print parameters for the batch | Issued per batch |
| Pressure test report | Burst and deformation testing of the batch | Open — requested from the plant TBC |
Question about your spec?
Send the body diameter and the product you are filling. We answer in writing, usually the same working day.
“Not claimed” means exactly that: the site makes no statement about the certificate either way, and no logo is reproduced. If your vendor process requires one of these, ask — the answer will be in writing rather than implied by a badge.
Two documents we are not required to hold
UN 1950 is a classification, not a certificate. Empty aluminium aerosol cans are not classified as UN 1950 dangerous goods. UN 1950 applies to non-refillable receptacles containing compressed, liquefied or dissolved gas and fitted with a self-closing release device; an unfilled, unpressurised can does not meet that definition.
South Africa requires no product certification for empty aluminium cans. No mandatory product certification applies to empty aluminium aerosol cans. NRCS compulsory specifications do not cover empty aluminium aerosol cans, and no letter of authority (LOA) is required. Ask for this in writing for a specific destination and it is answered with the quotation — the requirement belongs to the product being filled, not to the empty can.
Why is there no logo wall?
Because a logo wall is not a document. Standards bodies publish rules about how their marks may be used, and reproducing a mark on a supplier website without a certificate behind it is at best sloppy and at worst actionable. Where a certificate exists, the buyer gets the PDF — which is what their vendor file needs anyway, since a screenshot of a website has never satisfied an auditor.
Which documents does an enquiry actually produce?
Three, in this order: the specification sheet for the size and construction you asked about, the quotation with the commercial terms stated in writing, and the ISO 9001 copy. A sample follows once the specification is agreed, and test reports follow where the project needs them — the burst and deformation report is currently being requested from the plant and is marked open for that reason.
If a fourth document is needed — a declaration of conformity, a substance statement, an audit report — it is better to ask at the enquiry than to discover the gap during vendor onboarding.
What the certificate does not cover
The valve, the actuator, the cap and the filling operation, because none of those are made here. A quality certificate for this plant says nothing about a valve sourced elsewhere, and a buyer assembling a compliance file needs that boundary stated rather than glossed. It is the same boundary that appears on every page of this site.
Questions
Questions about certification
Can you send the ISO 9001 certificate?
Yes — a PDF copy is supplied with the quotation, and it can be sent earlier if you need it before a commercial discussion. The certificate number and the validity dates are on that copy. They are deliberately not reproduced on this page, because a transcribed number that is not kept current is worse than pointing to the document itself.
Do you have food-contact approval for the internal lining?
That is open, and it is asked of the factory rather than assumed. A food-contact declaration depends on the specific lining grade, so the answer is only meaningful once a lining has been selected for a formulation — and aerosol cans for cosmetic and technical products rarely need one. If your product needs it, raise it at the enquiry and it will be answered in writing.
Are you audited by your customers?
Customer-specific audits are arranged per enquiry, and some buyers run their own instead of relying on ISO 9001. Third-party social audits such as SMETA or SEDEX are not claimed on this site; if your vendor process requires one, ask and the current position will be confirmed rather than implied.
Not answered above?
Ask the question directly — one line is enough to start.
Adjacent
Where to go next
Send the specification you have. We will fill the gaps.
Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.