Products · De 56–66 mm
Large format for technical aerosols, De 56–66 mm.
The widest of the three bands. De 56–66 mm carries industrial and automotive formulations, larger fills and longer spray times — and a wider body means more print area, which matters when the label has to explain a technical product.
66 mm is the top of our range — height reaches 240 mm, and industrial and automotive fills sit here. Not the right choice for standard 53 mm deodorant cans at volume: local plants make those cheaper and faster.
What makes this band different from the other two?
Print area and spray duration, in that order. A wider body holds a larger fill and a longer continuous spray, so the same can has to carry both the product and the instructions for using it. That usually means more copy on the label, which is where the extra circumference earns its place.
- Industrial maintenance and technical aerosols
- Automotive service products, cleaners and lubricants
- Larger fills where a slim or mid body would run out too quickly
- Labels that carry instructions, hazard text and a technical data block
What is fixed in this band and what is decided per order?
| Parameter | Position in this band | Status |
|---|---|---|
| Body diameter | 56–66 mm | Confirmed |
| Can height | Chosen within the plant range 88–240 mm | Usable height per size TBC |
| Capacity (C2) | Derived from the chosen De × H3 | TBC per size |
| Internal coating | Selected against your formula and solvent system | TBC per formula |
| Up to 8 colours, largest print area of the three bands | Confirmed | |
| Valve interface | 1″ (25.4 mm) standard | Confirmed |
| Minimum order | Confirmed with the quotation | TBC |
Question about your spec?
Send the body diameter and the product you are filling. We answer in writing, usually the same working day.
Does a bigger can need a different coating?
Not because it is bigger, but because technical formulas usually are what they are. Solvent-based industrial and automotive products place more demand on the lining than a cosmetic emulsion does, and the lining is selected against the formulation — product type, solvent system, propellant and storage temperature — not against the can size.
Which valve does a large-format can take?
1″ (25.4 mm) is standard at these diameters. Technical sprays often use valves with a different actuator and dip tube, but that is the valve maker's part of the job: we form the can and crimp the cup to your valve drawing so your filling line stays unchanged.
What do we need before quoting?
- Body diameter and can height, or the fill volume plus the product type
- Solvent system and propellant, for the lining
- Valve interface and the valve you already run
- Whether the label carries hazard text — it changes how much print area you need
Pressure ratings for this band are not published yet. The burst and deformation values are requested from the plant and will appear here once the test report is in hand.
Questions
Questions about large-format cans
Can a large-format can be printed in eight colours like the smaller ones?
Yes. Up to eight colours on the body across all three bands; this one simply has the most surface to print on, which is why technical labels usually land here.
Is De 66 mm the largest diameter available?
66 mm is the upper end of the confirmed body diameter range. Larger sizes are outside the published range and are not quoted until the factory confirms the tooling.
Why is the pressure rating not published?
Because it has not been confirmed in writing yet. The burst and deformation values come from a test report, and we publish the figure with the report rather than estimating it from a standard.
Not answered above?
Ask the question directly — one line is enough to start.
Next
Other diameter bands
Send the specification you have. We will fill the gaps.
Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.