Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

White-coated can bodies on the internal spray line

Applications · Topical & dermal

Cosmetic skin sprays only. We do not make pharmaceutical aerosols.

Body mist, sunscreen spray, after-sun, foot spray, dry body oil. These are cosmetic products, and the can is specified as a cosmetic pack: an ethanol or oil carrier, a fine mist, and a print that carries cosmetic claims. If the product makes a medicinal claim, treats a condition, or is registered as a drug or a medical device in its market, it is outside what this factory does.

De 35–55 mm · cosmetic claims only · fine mist

Where exactly is the line?

It is drawn by the claim, not by the ingredient list. A sunscreen that carries an SPF and is sold as a cosmetic in its market is a cosmetic pack. A spray that claims to treat a skin condition, to disinfect a wound, or to deliver an active at a therapeutic dose is a medicinal product, and we do not make that can. The same distinction governs whether the brand needs a cosmetic product file or a marketing authorisation, and it is the brand's regulatory adviser who decides it — not the can supplier.

The line is stated on this page, in public, because the alternative is worse: an enquiry that runs for three weeks before anyone admits the product is a borderline medical device. If you are unsure which side your product sits on, say so in the first message and we will tell you where we stand rather than where we would like it to be.

Cosmetic only. No pharmaceutical aerosols, no medical devices, no wound care, no OTC drug products. This is a scope statement, not a negotiating position.

Which cosmetic formats fit an aluminium can?

Anything that wants a fine, continuous mist and a cool application: body mist and body spray, sunscreen and after-sun, foot and leg sprays, dry oils, and setting or refreshing face mists in the larger formats. The common thread is a low-viscosity carrier — ethanol, a light emollient, or a hydro-alcoholic blend — because a heavy cream or a gel does not atomise from an aerosol can and belongs in a pump or a bag-on-valve instead.

  • Ethanol or hydro-alcoholic carrier — body mist, refreshing spray, setting spray
  • Oil carrier — dry body oil, after-sun oil, sprayable sunscreen
  • Emulsion — sunscreen and after-sun, where the spray must deposit a film

What does a sunscreen do to the specification?

Two things. First, an emulsion is not a single-phase fill: it needs the can to be shaken by the user, and it can separate or cream at the valve if the formulation is unstable, so the valve and the can have to be tested together rather than separately. Second, a sunscreen is usually sold in a larger fill than a body mist, because the application rate is per square centimetre of skin rather than per pulse — which pushes the diameter towards De 46–55 mm and the height up.

A sunscreen also carries the most regulated label of any cosmetic, in every market, and that text block is the first thing to check against the printable area.

Which diameter and height?

De 35–45 mm for face mist, travel sizes and concentrated products. De 46–55 mm for body mist, sunscreen and after-sun, where the fill is larger and the can is used in the hand for longer. De 56–66 mm is unusual here: at that width the can stops feeling like a cosmetic pack.

  • De 35–45 mm — face mist, travel and trial sizes
  • De 46–55 mm — body mist, sunscreen, after-sun, dry oil
  • De 56–66 mm — rarely; the format reads as household rather than cosmetic

What does the print have to carry?

The cosmetic claim, the ingredient list (INCI), the net content, the batch and the responsible-person details for the market. Sunscreen adds an SPF statement and, in most markets, usage and reapplication wording. As with insecticide, the text block decides the layout — but unlike insecticide, this sector also has to look desirable, and the two requirements pull against each other. A layout that gives the legal text a clear band and the brand the upper body usually satisfies both.

What this sector asks of the can
Requirement Why it matters What we do
Cosmetic-only scope A medicinal claim puts the product outside our capability Stated on this page; borderline products declined at enquiry
Fine, continuous mist The product is applied to skin, not to a surface Low-viscosity carriers; valve matched to your component
Emulsion stability Sunscreen can separate or cream at the valve Can and valve tested together, not separately
Alcohol compatibility Body mist carriers are ethanol-based Lining selected against the carrier TBC
Regulated cosmetic label INCI, SPF statement, responsible person Print area and minimum type size checked against the wording
Shelf presence A cosmetic pack is judged on the shelf Up to 8 colours and full-body print area

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

Who carries the regulatory responsibility?

The brand, through its responsible person in each market, and its product information file. We supply a can and a specification; we do not provide a cosmetic safety assessment, a CPNP or equivalent notification, or claims advice. Where a project needs those, the brand's own regulatory adviser is the right party, and we will work to the specification that comes out of it.

EA Packaging makes the container only: we do not fill cans, do not formulate product, and do not issue EAC, ANVISA or ANMAT registrations. What you get is a monobloc aluminium can, De 35–66 mm and H3 88–240 mm, printed in up to 8 colours, with the internal coating matched to the formula you describe and the valve cup at 1″ (25.4 mm) or 20 mm. Both are confirmed in writing before we quote, and we supply the test reports and material declarations your importer files under its own name.

Questions

Questions about cosmetic sprays

Do you make pharmaceutical aerosols or medical devices?

No. Not pharmaceutical aerosols, not medical devices, not wound-care or disinfectant sprays, and not OTC drug products. The factory makes aluminium aerosol cans for cosmetic and technical products. A product whose claims put it in the medicinal category is outside our scope, and we would rather decline it at the enquiry than discover the mismatch at the sample stage.

Is a sunscreen a cosmetic or a medicine?

In most markets a sunscreen sold with an SPF and cosmetic claims is regulated as a cosmetic; some markets classify certain SPF products differently, and the decision belongs to the brand's regulatory adviser. We can make the can either way — what we cannot do is make a can for a product registered as a medicine.

Can you fill and assemble the finished product?

No. We make the can, and we crimp the valve cup to the valve you specify. Filling, gassing, actuator and cap assembly, and the finished-goods regulatory checks are done by the brand or by a contract filler. Keeping that boundary is why responsibility for a leaking valve stays with the valve maker and responsibility for the can stays with us.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8