Logistics · Export documents
An empty can is not dangerous goods. The freight paperwork still has to say so.
Every first shipment meets the same three questions at the booking desk. The commodity line reads aerosol can, the carrier's system hears Class 2, and someone asks for a dangerous goods declaration for a pallet of empty, unpressurised aluminium. Resolving that takes one definition, one certificate and one sentence on a factory letterhead — so this page states all three, in the order they get asked.
What makes a can dangerous goods, and why an empty one is not?
UN 1950 covers aerosols. The definition carries three conditions at once, and a can has to meet all three to fall inside it: it must be a non-refillable receptacle, it must contain a gas — compressed, liquefied or dissolved under pressure — and it must be fitted with a release device. The wording appears in the UN Model Regulations, Chapter 1.2, and the same three conditions are carried into the IMDG Code and the IATA Dangerous Goods Regulations.
A can leaving this plant meets the first and third conditions and fails the second. It is empty. There is no propellant in it, no pressure inside it, and nothing to release. It is not a Class 2 article and it does not need a dangerous goods declaration, dangerous goods packing or a Class 2 freight rate.
The one way to lose that status is on our side, not yours. Some lines hold nitrogen pressure in the can after the leak test. A can shipped with nitrogen inside contains a compressed gas and becomes Class 2 the moment it is booked — it must be vented and the venting recorded before it can travel as general cargo. Ask us which of the two you are buying; the answer belongs on the invoice, not in a conversation.
Which documents does a carrier actually ask for?
In practice the carrier asks for the same short list every time, and only the first item is the one people get stuck on.
| Document | Who issues it | When it is needed |
|---|---|---|
| Goods transport conditions assessment | An accredited testing body in the exporting country | First shipment, and again when the carrier changes; usually valid for one calendar year |
| Non-hazardous cargo declaration | Us, on factory letterhead, sealed | Every booking; some carriers accept only the original |
| Statement that the cans are unpressurised | Us, on factory letterhead | When the commodity description alone is not accepted |
| Commercial invoice and packing list | Us | Every shipment |
| Bill of lading | Your forwarder | Every shipment |
| Safety data sheet, or a product description for metal | Us | On request; a bare metal can is usually served by a short description rather than a full SDS |
Question about your spec?
Send the body diameter and the product you are filling. We answer in writing, usually the same working day.
The assessment in the first row is the one that unlocks the rest. It is issued per mode — sea, air, road, rail — so a certificate written for sea freight does not cover an air shipment, and this is the usual reason a document that worked last time gets rejected.
Which HS code goes on the commercial invoice?
7612.90, at six digits. Heading 76.12 covers aluminium casks, drums, cans, boxes and similar containers for any material — with compressed or liquefied gas explicitly excluded — and 76.13 covers containers for compressed or liquefied gas. An empty can holds neither, so it belongs in 76.12.
Three neighbouring codes are wrong for this product, and each is wrong for a different reason:
- 7613.00 — gas cylinders. Oxygen, LPG, life-raft inflation. Choosing it turns a can into a pressure vessel on paper and invites a certification request nobody can satisfy.
- 7612.90.10 in the Chinese tariff — beverage can bodies. It carries an inbound food-safety control that has nothing to do with an aerosol can, and pulling that control onto a cosmetic can wastes weeks.
- A national suffix chosen by us. The correct suffix depends on capacity and on how the importing country reads the heading, and that determination belongs to your broker, not to us.
We will state 7612.90 on every document we issue and stop there. If your broker needs a longer code, they add it — that keeps the classification liability where the local knowledge is.
What do we supply, and what does your broker produce?
Splitting this cleanly is what stops a shipment sitting at the port while two companies each assume the other is handling it.
| Item | Produced by | What your side still does |
|---|---|---|
| HS classification at six digits | Us | Quote it as issued; the suffix is added at destination |
| National tariff code and duty calculation | Your broker, at destination | Price the shipment; the number is only right in your market |
| Certificate of origin | Us, through the CCPIT | A general CO — proves origin and nothing more |
| Preferential origin certificate | Us, only where an agreement exists | Check the agreement before you budget for a reduction; if none exists we say so |
| Non-hazardous and unpressurised declarations | Us, on factory letterhead | Ask for the sealed original if your carrier rejects a copy |
| Transport conditions assessment | A testing body; we commission it and take the certificate in our name | Confirm the mode — sea, air, road and rail are not covered by one certificate |
| Import licence, registration or conformity file | You, in the destination country | We supply the technical file behind it |
| Apostille or consular legalisation | Us, on request | Tell us which documents the authority expects, and where |
A note on the origin certificate, because it is where expectations most often outrun reality. A general CO proves origin and nothing more. A preferential certificate reduces duty, and it only exists where China has an agreement with the destination — which is not the case for South Africa, Brazil, Argentina, or the five Central Asian states. For those markets the honest document is the general CO.
How is the can packed for sea freight?
Palletised and stretch-wrapped, with a layer pad between tiers so that a can does not stand on the print of the one below it and scuff it in transit. Moisture is the other enemy on a six-week sea passage, so the wrap is closed and desiccant is added where the route crosses climates.
Where wooden packaging is used, it is heat-treated and marked to ISPM 15 with the IPPC mark. Plywood and processed board are exempt. If your market or your own warehouse requires plastic or corrugated pallets instead, say so before the order is packed rather than after.
Why is there no duty rate on this page?
Because a single number would be wrong for part of your order. Import duty on this heading is not flat: it can differ by capacity band, and it differs by origin, and the origin that applies is the one your broker declares. A page that prints one figure would be accurate for some of your sizes and false for the rest, and a false figure in a supplier's own document is much more damaging than no figure.
What we will do instead is give you the classification, the packing data and the declarations, so your broker can price the shipment in one pass. The duty and the value-added tax at destination are confirmed by the importer's broker — that is the only place the number is right.
Questions
Questions about this page
Are empty aluminium aerosol cans classified as UN 1950?
No. UN 1950 requires a non-refillable receptacle that contains a gas under pressure and is fitted with a release device. An empty, unpressurised can contains no gas and has nothing to release, so it is not a Class 2 article. The exception is a can shipped with nitrogen hold pressure after the leak test — that one does contain a compressed gas and must be vented before it travels as general cargo.
Which HS code do you put on the invoice?
7612.90, at six digits. Heading 76.12 covers aluminium containers for any material other than compressed or liquefied gas, and 76.13 covers gas containers — an empty can is in the first. We do not choose an eight- or ten-digit national suffix, because the correct suffix depends on capacity and on the importing country's reading of the heading, and that determination belongs to your broker.
Do you charge the cans with nitrogen for leak testing?
The leak test is part of the line, but the question that matters for freight is whether the can still holds pressure when it is packed. That is a production decision per order and it is stated on our documents rather than assumed. If a shipment is charged, it must be vented and the venting recorded before booking, or the carrier is entitled to treat it as Class 2.
Not answered above?
Ask the question directly — one line is enough to start.
Send the specification you have. We will fill the gaps.
Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.