Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

Rows of coated can bodies standing on the production line

Applications · Insecticide

Insecticide is the sector that asks for the most label and forgives the least.

Mosquito spray, crawling-insect spray, wasp jet spray, personal repellent. Every one of these products is regulated in every market it enters, and the regulation lands on the can as text: registration or authorisation numbers, active ingredient statements, hazard and first-aid wording, batch and expiry. The can therefore has to be specified around a text block before it is specified around a colour.

De 46–66 mm · solvent or water carrier · registration text

What makes an insecticide formulation different from a household one?

The active is a small percentage and it is rarely the difficult part. What differs is the carrier. A solvent-based insecticide — typically a hydrotreated petroleum distillate — behaves much like an automotive product: it is unkind to the lining and it flashes, which changes the filling environment but not the can. A water-based insecticide carries the active in emulsion and behaves like a household product instead, with slow water-borne corrosion as the risk.

The distinction matters because the two are quoted differently and sampled differently. Sending a formulation without naming its carrier is the most common reason a first sample misses.

Does the active ingredient interact with the aluminium?

The active itself usually does not, at the concentrations used; the carrier and the co-solvents do. Where a formulation contains a pyrethroid in a solvent system with an acidic stabiliser, or a repellent such as DEET in an alcohol carrier, the combination is what the lining has to be chosen against. DEET in particular is a known aggressor against many polymers, so a repellent is a specification that should be sampled rather than assumed.

If the formulation contains DEET, name it in the first message. It changes the lining shortlist before anything else is discussed.

How much print area does the regulation take?

More than any other sector. A single-market insecticide can typically carries: the product name and use, the active ingredient and its concentration, a registration or authorisation number, hazard pictograms, signal word, precautionary and first-aid statements, directions for use, net content, batch code, expiry date, manufacturer and importer. On a De 46–55 mm body at a 300 ml fill that is most of the printable surface before a brand mark is placed.

Two consequences follow for the specification. First, the print area question is answered before the artwork is designed, not after — a design that assumes a large logo and a small legal block will not fit. Second, an eight-colour capability is worth less here than a layout that keeps a clear band for text at a legible size, which is why this sector often prints fewer colours than personal care and looks more like a technical document.

Which formats are used?

De 46–55 mm for household insect sprays and personal repellents; De 56–66 mm for wasp jet spray and for institutional or professional pest control, where the product is used in longer bursts and the label has to be readable by a technician wearing gloves.

  • De 46–55 mm — mosquito and crawling-insect spray, personal repellent
  • De 56–66 mm — wasp and hornet jet spray, professional pest control
  • De 35–45 mm — travel and personal-size repellent

What is outside our scope, and does it matter more here?

Registration. The can is a container; the authorisation to sell an insecticide in a given country sits with the brand, and the text we print is the text the brand supplies. We can tell you how much room a given block of text needs on a given diameter, and we can warn you when a layout will not hold the wording at a legible size — that is a print and geometry question, and it is ours. Whether the wording satisfies a regulator is not.

What this sector asks of the can
Requirement Why it matters What we do
Solvent carrier compatibility Petroleum-distillate carriers are unkind to linings Lining shortlisted against the carrier; grades on the specification sheet TBC
Aggressive actives DEET and some stabilisers attack polymers Named in the brief; sampled before commitment
Regulated text block Registration, hazard, first aid, directions Print area and minimum type size checked against the wording before artwork is finalised
Batch and expiry coding Required on the unit, not just the carton Coding position agreed with the filling line TBC
Long burst duration Jet sprays and professional use empty slowly De 56–66 mm for the larger fills; valve and dip tube remain your component
Legibility in the field A technician may read it wearing gloves Contrast and type size treated as a specification, not a design preference

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

One honest limitation

Insecticides are the sector where a brand most often arrives with a design already approved by a marketing team and a text block still being written by a regulatory consultant. That order is backwards. The wording determines the layout, the layout determines how many colours survive, and the colours determine the print cost — so a design signed off before the text exists usually costs a second cylinder.

EA Packaging makes the container only: we do not fill cans, do not formulate product, and do not issue EAC, ANVISA or ANMAT registrations. What you get is a monobloc aluminium can, De 35–66 mm and H3 88–240 mm, printed in up to 8 colours, with the internal coating matched to the formula you describe and the valve cup at 1″ (25.4 mm) or 20 mm. Both are confirmed in writing before we quote, and we supply the test reports and material declarations your importer files under its own name.

Questions

Questions about insecticide

Can aluminium hold a solvent-based insecticide?

Yes, and it is common. The lining has to be chosen against the specific carrier — a hydrotreated distillate is a different proposition from an alcohol or a water emulsion — so the carrier and any co-solvent belong in the first message. Without them the recommendation is a guess.

Do you handle product registration?

No. Registration or authorisation for an insecticide sits with the brand in each market, and the wording we print is the wording you supply. What we can do is check that the wording fits the printable area at a legible size on the diameter you have chosen, and say so before the artwork is signed off.

Can you print on the base or the shoulder as well as the body?

The body is the printable surface, and that is where the layout has to work. Printing on surfaces other than the body — the base or the shoulder — is a separate decision with its own tooling implications, so it is quoted per project rather than assumed TBC.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8