Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

Printed can bodies travelling along the conveyor after decoration

Products · De 46–55 mm

The general-purpose band, De 46–55 mm.

The middle band carries most projects. Household, insecticide, air care and automotive products all sit here, and this is the widest part of the height range — so most standard fills fall inside it without a special size being cut.

The general-purpose band: deodorant, air care and household cleaners carry the volume here, and can height runs from 88 to 240 mm. If your product has no unusual fill or valve requirement, start at this band.

De 46–55 mm · H3 88–240 mm · widest height choice

Why is this the band most orders land in?

Because the middle of a range is where standard fills already are. Aerosol products cluster around a handful of fill volumes, and most of them resolve into a body diameter in this band at some height within 88–240 mm. That means the tooling already exists and the order does not carry a size-development step.

  • Household: air care, fabric care, cleaning foams
  • Insecticide and repellent sprays, solvent- and water-based
  • Automotive maintenance and technical sprays
  • General personal care where a slim body is too small

What is fixed in this band and what is decided per order?

De 46–55 mm — what is fixed and what is open
Parameter Position in this band Status
Body diameter 46–55 mm Confirmed
Can height Chosen within the plant range 88–240 mm — widest choice here Usable height per size TBC
Capacity (C2) Derived from the chosen De × H3 TBC per size
Internal coating Selected against your formula TBC per formula
Print Up to 8 colours on the body Confirmed
Valve interface 1″ (25.4 mm) standard; 20 mm on request Confirmed
Minimum order Confirmed with the quotation TBC

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

What decides the height inside this band?

The fill, and how the product is used rather than how it is packed. A spray that runs for two seconds per use needs less propellant headroom than one that runs continuously, and the label has to fit whatever is left. Height is chosen with the fill and the valve together, not after them.

Which valve is standard here?

1″ (25.4 mm) is the default at these diameters, because it is the interface most filling lines already run. The 20 mm compact valve remains available where the shoulder needs to stay narrow, but the crimp dimensions are always matched to your valve drawing.

What do we need before quoting?

  • Body diameter and can height, or the fill volume plus the product type
  • Valve interface and, if you have one, the valve you already run
  • Product type, solvent system, propellant and storage temperature
  • Destination market — the documents that travel with a shipment depend on it

Questions

Questions about the middle band

Can this band replace a size I already buy elsewhere?

Usually yes, but the match is De × H3, not the fill volume. Send the diameter and height of the can you buy today plus the valve you run, and the comparison is made on those numbers rather than on a catalogue description.

Is the widest height choice really in this band?

Yes — the height range 88–240 mm is fully available here, which is why most standard fills resolve without a new size. The usable height for a specific diameter is still confirmed per size on the drawing.

Which sectors use this band most?

Household, insecticide and automotive. Each of them has a page in the applications section describing what the formula changes about the coating.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8