Tell us the diameter and what you fill. One line starts a quote.

Quick message

Leave a contact. We reply in writing.

Two fields are enough. If you only know the end product, say that — we will ask for the rest once.

Reply within one working day · GMT+8

Prefer to write directly? +86 138 0518 4203

A shelf of printed aerosol cans in different finishes and sizes

Applications · Household

Household is where the cheapest mistake is made and the most expensive one is found.

Air freshener, fabric refresher, furniture polish, starch spray, disinfectant, oven cleaner. This sector works on thin margins and long shelf lives, and those two facts decide the specification: the can has to be economic per unit and it has to survive a warehouse, a container and a supermarket shelf without a single rust spot on the base.

De 46–66 mm · water-based and alkaline fills · 8 colours

Why is a water-based fill harder on the can than a solvent one?

A solvent evaporates and leaves the lining alone. Water stays, and it stays in contact with the metal for the whole shelf life while carrying whatever the formulation uses to make it work: salts, surfactants, chelating agents, fragrance. Water-borne corrosion does not announce itself. It begins as a discolouration under the lining, becomes a blister, and reaches the outside as a pinhole long after the pallet has left the plant — which is why the complaint arrives from a retailer rather than from a filling line.

The practical consequence is that a household specification is decided by the lining and by the residual moisture in the can before filling, not by the print. It is also the reason we ask for pH and for the carrier before quoting, and why a formulation change after approval has to be treated as a new project.

What does an alkaline product do to aluminium?

Aluminium is amphoteric: it is attacked by strong acid and by strong alkali alike. A caustic oven cleaner sits at the aggressive end of the range, and an ammonia-based glass cleaner is not far behind. Aluminium cans are used successfully in this sector, but only with a lining specified for that pH band and a base geometry that does not trap product. Where a formulation sits far outside the comfortable range, the honest recommendation may be a different container rather than a thicker lining.

Send the pH, the carrier, and any active that is a salt. Those three answers decide whether this is a routine project or a development project.

Which formats does the sector use?

De 46–55 mm is the working centre: air fresheners, fabric refreshers, disinfectant sprays and polish all sit here, at heights that give a comfortable 300–500 ml and a can that still fits a supermarket shelf. De 56–66 mm appears where the product is sold on value — large air fresheners, multi-surface cleaners, and industrial-size disinfectant for institutional buyers.

  • De 46–55 mm — air freshener, fabric refresher, polish, starch, surface disinfectant
  • De 56–66 mm — value packs, institutional and janitorial sizes
  • De 35–45 mm — occasional trial and travel formats, and concentrated air fresheners

What does the label have to carry that the print budget resists?

Household products carry the largest mandatory text block of the seven sectors, and it is the block that gets compressed first when the print budget is squeezed. Hazard pictograms, signal words, precautionary statements, an expiry or batch reference and importer details all have to be legible at the size the regulator expects, on a curved surface, in every language of every market the pallet is destined for.

Two practical notes. A multi-market label usually means either more print area or a smaller type size, and only one of those is negotiable. And a barcode or a QR code printed on a curved body has a curvature limit: below a certain repeat length the scan rate falls off, so the code is worth testing at sampling rather than discovering at the till.

Where does cost actually sit in a household can?

Not where buyers usually look. The metal is a fixed cost set by the size; the two items that move the unit price are the print (number of colours, and whether the artwork needs a white basecoat to make the colours sit on aluminium) and the lining, which is a formulation decision rather than a purchasing decision. Cutting colours is easy and visible; cutting the lining is invisible until the returns arrive.

What this sector asks of the can
Requirement Why it matters What we do
Water-borne corrosion resistance Water stays in contact for the whole shelf life Lining specified per formulation; grades named on the specification sheet TBC
Alkali tolerance Caustic and ammonia cleaners attack aluminium directly pH band confirmed before quoting; a different container recommended where pH sits outside it
Long shelf life Warehouse, container, then retail shelf External base protection specified per project TBC
Large mandatory text Hazard and precaution text is regulated per market Up to 8 colours and full-body print area; artwork checked for minimum type size
Value formats Large packs are sold on price per millilitre De 56–66 mm covers the institutional and family sizes
Multi-market SKUs One pallet, several label languages Artwork versions managed per market against the same can specification

Question about your spec?

Send the body diameter and the product you are filling. We answer in writing, usually the same working day.

Call +86 138 0518 4203

What we do not do — and what that leaves you

EA Packaging makes the container only: we do not fill cans, do not formulate product, and do not issue EAC, ANVISA or ANMAT registrations. What you get is a monobloc aluminium can, De 35–66 mm and H3 88–240 mm, printed in up to 8 colours, with the internal coating matched to the formula you describe and the valve cup at 1″ (25.4 mm) or 20 mm. Both are confirmed in writing before we quote, and we supply the test reports and material declarations your importer files under its own name.

Questions

Questions about household products

Can an aluminium can hold a caustic oven cleaner?

It can hold an alkaline formulation, but the pH band decides the lining, and the aggressive end of that band is where aluminium stops being the easy answer. Send the pH and the actives and we will say whether it is a routine project or one that needs sampling and a stability test before anything is committed. Recommending a different container where the chemistry demands it is a legitimate outcome.

Do water-based fills need a different can from solvent-based ones?

Not a different can — a different lining, and often a different drying regime before filling. Water-borne corrosion is slower and quieter than solvent attack, which makes it more dangerous commercially: nothing fails at the plant, and the complaint arrives from a shelf months later. That is why the carrier is the first question we ask.

Can you print a barcode or QR code on the body?

Yes, within the curvature limit of the body diameter. A code printed around a small diameter distorts at the edges and the scan rate drops, so the code is worth testing at sampling on the actual diameter rather than assuming it will read. Where the diameter is tight, the base or the label is the safer position.

Not answered above?

Ask the question directly — one line is enough to start.

Call +86 138 0518 4203

Send the specification you have. We will fill the gaps.

Body diameter, can height and valve interface are enough to start. Anything you do not have yet we ask for once, in writing.

Request a quote Call +86 138 0518 4203

Reply within one working day · GMT+8